Fret Slot Depth Tester

fret slot depth   Dan fret slot depth

A correct fingerboard thickness should be roughly 14″, meaning your cut depth should roughly be 18″ Cutting at a 18″ depth will ensure that

Most fret slotting profiles are a standard ″ width at the tang, our 18″ shank Fret Router bit works well for cutting 023″ fret slots It also can be Slots are normally cut to 023 for most fret wire used today Tang measurement varies a bit dependent upon size but it's usually around 116

monkey slot mega888 When I cut my fret slots I have a piece of fret wire with tangs filed off that I run through the fret to check that the slot is deep enough The Simply hold the flat edge against the fret tang, note the height of the tang against the reference lines, fit the appropriate curved edge into the slot, and